SP Elements

SCHOTT AG Automates Quality Inspection with OnRobot

This is an OnRobot company case study.

 

“In the last three years, the volume of samples here in the laboratory has increased by about 30 percent,” reports Dr Engel from SCHOTT, a leading international technology group in the areas of speciality glass and glass ceramics. This posed several challenges for the manager and his team: SCHOTT needed more capacity to test many samples in the time available. However, additional measuring equipment and personnel would only have limited space in the limited laboratory space. In addition, it took the employees a lot of time to load the measuring device. A measurement takes between three and 15 minutes, after which the employees have to interrupt other activities in order to insert a new sample. This is where the idea of automating the measuring process first came up.

We put a lot of time and effort into selecting a suitable automation solution,” recalls Dr. Engel. “The solution had to be space-saving and be able to work right next to the laboratory technicians. A conventional industrial robot was out of the question: it would have needed an additional protective enclosure, and there is no room for that”. There was also another difficulty: the measuring device, a so-called transmission spectrometer, which records the optical properties of the glass, is extremely sensitive. Inserting the samples so the expensive device is not damaged requires great sensitivity. “After looking at solutions from various manufacturers, we finally found what we were looking for in OnRobot,” reports Dr. Engel.

SCHOTT decided on an application in which an RG2-FT gripper from OnRobot is mounted on a collaborating robot arm. The special thing about the electric two-finger gripper is that both force/torque and optical sensors are located at its fingertips. These enable him to “think along”: The sensors feed their process data back to the robot arm, which adjusts its course accordingly. This allows the gripper to measure the force applied to the arm precisely. This gives the application the necessary sensitivity to load the spectrometer with millimetre precision. Also, the fingertips were customised. They consist of aluminium and are coated with foam rubber to grab the individual glass samples perfectly.

Now, the application not only runs through the night but also during the weekend. As a result, the application has handled most of the samples before the laboratory employees come into work. Therefore, the laboratory technicians directly benefit from the application. They do not need to insert the glass samples into the spectrometer manually – they can focus on elaborate test reports. Dr. Engel is satisfied with the pilot project: “With the application, we can work much more efficiently and relieve our employees,” he sums up. Thanks to the rapid integration and smooth processes, the application also promises a rapid ROI: “We expect the purchase to pay for itself within five to six months”.

 

to find out more about EoAT, visit our End of Arm Tooling (EoAT) page.

Find Out More

    SP Automation & Robotics needs the contact information you provide to us to contact you about our products and services. You may unsubscribe from these communications at any time. For information on how to unsubscribe, as well as our privacy practices and commitment to protecting your privacy, please review our Privacy Policy.